FB Email
BeamZ SHOWBAR 2x PAR, 2x Butterfly and R/G Laser DMX IRC Padidinti

BeamZ SHOWBAR 2x PAR, 2x Butterfly and R/G Laser DMX IRC

Naujas

The ultimate SHOWBAR kit containing 6 effects mounted on a DMX T-bar. The SHOWBAR is a pair of LED butterfly effect lights, a pair of LED pars, a powerful green and red laser and a strobe effect. The T-bar contains 4 built-in 1W high power white LEDs to create an amazing strobe effect. The T-bar can be controlled in a 2-channel easy DMX setting, 9 and 18 or 30-channel fully customizable setup. The T-bar is also equipped with an IR sensor for controlling on distance by remote control. You can also use the wireless foot-controller to simply swap between auto mode or sound activated mode. Link multiple units together with IEC-connector and DMX. The SHOWBAR can be mounted on a 38mm stand or you can use the mounting brackets on both sides to mount it to the ceiling.

  • 2x PAR Cans with each 6x 8W LED 4-in-1 RGB-UV
  • 2x Butterfly with each 4x 3W RGBW
  • 4x 1W White strobe effect
  • Laser Red/Green 70/100mW
  • DMX and stand-alone mode
  • 2, 9, 18 or 30 DMX channels
  • Master/slave synchronization
  • Sound activated with adjustable sensitivity
  • Auto mode with adjustable speed
  • Pre programmed shows
  • DMX in-/output via 3-pin XLR
  • IEC-connector in-/output
  • Control panel with LED display
  • Wireless footcontrol
  • IR-Remote control
  • Complete with bag
  • Supplied without stand

Daugiau informacijos

459,00 €

Pridėti prie pageidavimų

Laser Class 3B
Laser Green 100mW
Laser Red 70mW
DMX channels 2, 9, 18, 30
No. of LEDs 12x 8W LED 4-in-1 RGB-UV, 8x 3W RGBW, 4x 1W Strobe
Power supply 100-240VAC / 50-60Hz
Dimensions 1200 x 220 x 400mm
Weight 12kg

Parašyti atsiliepimą

BeamZ SHOWBAR 2x PAR, 2x Butterfly and R/G Laser DMX IRC

BeamZ SHOWBAR 2x PAR, 2x Butterfly and R/G Laser DMX IRC

The ultimate SHOWBAR kit containing 6 effects mounted on a DMX T-bar. The SHOWBAR is a pair of LED butterfly effect lights, a pair of LED pars, a powerful green and red laser and a strobe effect. The T-bar contains 4 built-in 1W high power white LEDs to create an amazing strobe effect. The T-bar can be controlled in a 2-channel easy DMX setting, 9 and 18 or 30-channel fully customizable setup. The T-bar is also equipped with an IR sensor for controlling on distance by remote control. You can also use the wireless foot-controller to simply swap between auto mode or sound activated mode. Link multiple units together with IEC-connector and DMX. The SHOWBAR can be mounted on a 38mm stand or you can use the mounting brackets on both sides to mount it to the ceiling.

  • 2x PAR Cans with each 6x 8W LED 4-in-1 RGB-UV
  • 2x Butterfly with each 4x 3W RGBW
  • 4x 1W White strobe effect
  • Laser Red/Green 70/100mW
  • DMX and stand-alone mode
  • 2, 9, 18 or 30 DMX channels
  • Master/slave synchronization
  • Sound activated with adjustable sensitivity
  • Auto mode with adjustable speed
  • Pre programmed shows
  • DMX in-/output via 3-pin XLR
  • IEC-connector in-/output
  • Control panel with LED display
  • Wireless footcontrol
  • IR-Remote control
  • Complete with bag
  • Supplied without stand

Parašyti atsiliepimą

Naujienlaiškiai

Įveskite savo el.pašto adresą

Norėdami gauti naujienlaiškį įveskite el.pašto adresą.

30 kitos prekės