Active 2-Channel DI-Box & Splitter

ADX-800 LINK is a DI-Box (Direct Injection Box) that converts up to two unbalanced audio signals (e.g. electric and / or acoustic guitars and basses, line signals such as guitar preamps, keyboards, multi-effects, computers, etc.) in balanced signals with XLR connections. This allows not only to attenuate the interferences that normally the unbalanced cables collect in the medium-long distances, but also acts as a splitter with a maximum of 3 outputs for Channel1 (2 XLR outputs + 1 balanced ¼ TRS Jack). It can be powered either by the supplied power adapter, or through the + 48V Phantom power coming from the mixer. It is equipped with a 3-position input attenuator (0dB, 20dB, 40dB) – to adapt the preamp stage to all types of signals – and the lift ground switch, very useful in case of ground loop. ADX-800 LINK is essentially an indispensable tool on stage, in the rehearsal room and recording studio to solve problems for musicians, DJs and sound engineers.

1 Channel Splitter function with max 3 Outputs

TRS 1/4 Jack Outputs

Balanced XLR Outputs

0/20/40dB Attenuation

Operable via external Power Adapter (supplied) or external Phantom Power

Ground Loop selector

Frequency Response: 10Hz-30KHz ±1dB

Max Input Level: 15 dBU ±1dB

Noise Level: -65dBU

Attenuation Pad: 0dB/-20dB/-40dB

Modes: 2-Channel/Link

Phantom Power (In case of power from balanced XLR connection): +48Vdc

Power Adapter (included): 12Vdc/100mA min.

Consumption: 2.3mA

Unit Size: 112x65x36 mm

Unit Weight: 260g

Carton Size: 130x150x40 mm

Carton Gross Weight: 400g (including DI-Box and Power Adapter)

http://images.myfrenex.com/dataweb/J196J/Allegati/MANUALI/[ENG-ITA]_ADX-800_LINK_User_Manual_V1.0.pdf