Pardavėjas neatsako už tai, kad El. parduotuvėje esančios prekės savo spalva, forma ar kitais parametrais gali neatitikti realaus prekių dydžio, formų ir spalvos dėl Pirkėjo naudojamo vaizduoklio ypatybių.
Mikrofono signalo stiprintuvas sE Electronics DM1 Black
Error: Missing text or target language.
94.00€
Užsukite į Muzikos parduotuvėje Šiauliuose ir atsiimkite savo užsakymą
Nemokamas
Pasirinkite sau patogiausią paštomatą
1-10 d.d.
Nuo 2.60€
Kurjeris prekes atveš į Jūsų nurodytą adresą
1-10 d.d.
Nuo 6.20€
Mokėjimo metodai
sE Electronics DM1 Black
An ultra-slim active inline preamp that fits seamlessly between your mic and mic pre, providing a massive +28dB of clean, transparent gain for all your passive microphones.
LOT of gain
Some mics need a LOT of gain – and not all preamps are up to the challenge. The DM1 DYNAMITE is an ultra-slim active inline preamp that fits seamlessly between your mic and mic pre, providing a massive +28dB of clean, transparent gain for all your dynamic and passive ribbon microphones – perfect for podcasting, recording, or live sound.
With a sophisticated class-A design and specially-selected high-grade FETs, the DM1 has vastly lower output impedance and nearly half the noise of anything else on the market. Additionally, the gain it provides is always a consistent +28dB regardless of the connected load, thanks to its dedicated buffer amplifier.
+28dB OF CLEAN, CONSISTENT GAIN, INDEPENDENT OF LOAD
- designed for neutral, balanced sound quality
- the perfect way to boost the signal of a passive microphone
- gain stays consistent regardless of connected load
- provides significantly improved level to your mic preamp for proper gain staging
SOPHISTICATED CLASS-A ELECTRONICS
- state of the art electronics and high-grade FETs provide supremely low noise
- transformerless design for pristine sound quality
- provides the lowest noise in its class
DEDICATED OUTPUT BUFFER AMPLIFIER
- provides +28dB output independent of load impedance or cable length
- extremely low output impedance
- drives long cable runs and can reduce susceptibility to RF interference, buzz & hum
SLIM, RUGGED ALL-METAL HOUSING WITH PREMIUM FINISH
- efficient rejection of any electrical interference and noise
- high-quality finish ensures a great look for many years
- slim design allows for easy placement in the studio or on stage
GOLD-PLATED XLR CONNECTOR
- for loss-free and reliable signal connection
SPECIFICATIONS
- Black version
- Frequency Range: 10 Hz – 120,000 Hz (-0.3 dB)
- Gain: 28 dB (load 1kOhms)
- Max output level (0.5% THD): 8.3 dBV (2.6 V)
- Output noise level: 9 μV (JIS-A)
- Powering: 48 Volts according toIEC 61938
- Electrical impedance: 135 Ohms
- Recommended load impedance: >1k Ohms
- Current consumption: 3.0 mA
- Connectivity: 3-pin male/female XLR connector
- Dimensions: Diameter: 19 mm Length: 95.5 mm
- Weight: 80 g
Ką sako pirkėjai
5,0 ★★★★★ „Google“Išardžiau kombiką – ir ką pamačiau? Analoginį spyruoklinį reverberatorių! Tokį dalyką sau leidžia tik „Fender“. Parašykite tai aprašyme – ir jį išpirks kaip karštus kibinus. Ačiū už kombiką!
Pirko: Kubas elektrinei gitarai Soundsation CREAM-30R 30W
Esu labai patenkinta apsipirkimu. Prekes užsakiau internetu, jos visiškai atitiko vaizdą e.parduotuvėje. Prekės kokybiškos, kruopščiai supakuotos ir pristatytos greitai. Ypač maloniai nustebino kartu su užsakymu įdėtos dovanėlės - tikrai pradžiugino! 🎁 Ačiū už puikų aptarnavimą ir malonias staigmenas! Rekomenduoju ir mielai sugrįšiu apsipirkti dar kartą!
žemos kainos, malonus aptarnavimas, visada malonūs pardavėjai
Labai gera parduotuve
sE Electronics DM1 Black
An ultra-slim active inline preamp that fits seamlessly between your mic and mic pre, providing a massive +28dB of clean, transparent gain for all your passive microphones.
LOT of gain
Some mics need a LOT of gain – and not all preamps are up to the challenge. The DM1 DYNAMITE is an ultra-slim active inline preamp that fits seamlessly between your mic and mic pre, providing a massive +28dB of clean, transparent gain for all your dynamic and passive ribbon microphones – perfect for podcasting, recording, or live sound.
With a sophisticated class-A design and specially-selected high-grade FETs, the DM1 has vastly lower output impedance and nearly half the noise of anything else on the market. Additionally, the gain it provides is always a consistent +28dB regardless of the connected load, thanks to its dedicated buffer amplifier.
+28dB OF CLEAN, CONSISTENT GAIN, INDEPENDENT OF LOAD
- designed for neutral, balanced sound quality
- the perfect way to boost the signal of a passive microphone
- gain stays consistent regardless of connected load
- provides significantly improved level to your mic preamp for proper gain staging
SOPHISTICATED CLASS-A ELECTRONICS
- state of the art electronics and high-grade FETs provide supremely low noise
- transformerless design for pristine sound quality
- provides the lowest noise in its class
DEDICATED OUTPUT BUFFER AMPLIFIER
- provides +28dB output independent of load impedance or cable length
- extremely low output impedance
- drives long cable runs and can reduce susceptibility to RF interference, buzz & hum
SLIM, RUGGED ALL-METAL HOUSING WITH PREMIUM FINISH
- efficient rejection of any electrical interference and noise
- high-quality finish ensures a great look for many years
- slim design allows for easy placement in the studio or on stage
GOLD-PLATED XLR CONNECTOR
- for loss-free and reliable signal connection
SPECIFICATIONS
- Black version
- Frequency Range: 10 Hz – 120,000 Hz (-0.3 dB)
- Gain: 28 dB (load 1kOhms)
- Max output level (0.5% THD): 8.3 dBV (2.6 V)
- Output noise level: 9 μV (JIS-A)
- Powering: 48 Volts according toIEC 61938
- Electrical impedance: 135 Ohms
- Recommended load impedance: >1k Ohms
- Current consumption: 3.0 mA
- Connectivity: 3-pin male/female XLR connector
- Dimensions: Diameter: 19 mm Length: 95.5 mm
- Weight: 80 g















