Small Diaphragm Matched Condenser Microphone Pair (SOUNDSATION PCM-8000 MATCH)
Ideal for Stereo Overhead, Choir, Cymbals, Percussion, Acoustic Instruments, and Piano
166.60€
Neturime
Neturime
20
-
Atsiėmimas parduotuvėje
Užsukite į Muzikos parduotuvėje Šiauliuose ir atsiimkite savo užsakymą
Nemokamas
-
Atsiėmimas paštomate
Pasirinkite sau patogiausią paštomatą
1-10 d.d.
Nuo 2.60€
-
Pristatymas kurjeriu
Kurjeris prekes atveš į Jūsų nurodytą adresą
1-10 d.d.
Nuo 6.20€
-
2 metų garantija
-
14 dienų prekių grąžinimas
-
Pardavėjas neatsako už tai, kad El. parduotuvėje esančios prekės savo spalva, forma ar kitais parametrais gali neatitikti realaus prekių dydžio, formų ir spalvos dėl Pirkėjo naudojamo vaizduoklio ypatybių.
Mokėjimo metodai
“PCM-8000 MATCH is a set of two condenser microphones with a 16 mm diaphragm, designed for stereophonic miking of acoustic instruments, overall shots for drums, choirs and live performances. The microphones are matched with tolerance within 1dB, and are equipped with 0dB/-10dB gain selector and 100Hz low-cut filter to adapt to all sources and mic preamps (+48V phantom power is required). The kit – contained in a practical plastic case with protective padding, in addition to the two microphones, includes two shock-mounts with screw adapters from 3/8 “”to 5/8″”, distance bar, and two pop-filters. The pressure gradient capsule with cardioid polar pattern is based on a 16mm gold-plated diaphragm. The process of plating with gold vapors deposited on the surface, gives lightness, an excellent electrical capacity and a linear frequency response. The body of the microphone, in lightweight and sturdy metal, contains the JFET preamplifier to maintain a high isolation between input and output stage, and low self-noise.”
16mm High-Quality Pressure Gradient Transducer
Vapor-Deposited Gold Diaphragm
Premium Quality Preamp Circuitry
High Sensitivity and Low Self-Noise
Cardioid Polar pattern
Linear Frequency Response
The Kit Includes 2x Matched Microphones, 2x Shock-Mount Mic Holders, 2 Pop-Filters, and 1 Adjustable Stereo Bar
Element: Pressure Gradient Transducer
Polar Pattern: Uni-directional (Cardioid)
Frequency Response: 30Hz-20kHz
Match Tolerance: Within 1dB (from 100Hz to 10kHz – excluding 1kHz)
Sensitivity: -38dB+/-2dB (0dB=1V/Pa @ 1kHz)
Output impedance: 100ohm +/- 30% @ 1kHz
Self-Noise: 16dB (A-weighted)
Max. input SPL: 130dB (@ 1 kHz = 1% T.H.D)
S/N Ratio: 78dB
Input Attenuation: 0dB/-10dB Selector
Low frequency attenuation: 100Hz 12dB/Octave
Power Requirement: +48V Phantom Power
http://images.myfrenex.com/dataweb/J023J/Allegati/MANUALI/[ENG-ITA]_PCM-8000_MATCH_User_Manual_v1.0.pdf
“PCM-8000 MATCH is a set of two condenser microphones with a 16 mm diaphragm, designed for stereophonic miking of acoustic instruments, overall shots for drums, choirs and live performances. The microphones are matched with tolerance within 1dB, and are equipped with 0dB/-10dB gain selector and 100Hz low-cut filter to adapt to all sources and mic preamps (+48V phantom power is required). The kit – contained in a practical plastic case with protective padding, in addition to the two microphones, includes two shock-mounts with screw adapters from 3/8 “”to 5/8″”, distance bar, and two pop-filters. The pressure gradient capsule with cardioid polar pattern is based on a 16mm gold-plated diaphragm. The process of plating with gold vapors deposited on the surface, gives lightness, an excellent electrical capacity and a linear frequency response. The body of the microphone, in lightweight and sturdy metal, contains the JFET preamplifier to maintain a high isolation between input and output stage, and low self-noise.”
16mm High-Quality Pressure Gradient Transducer
Vapor-Deposited Gold Diaphragm
Premium Quality Preamp Circuitry
High Sensitivity and Low Self-Noise
Cardioid Polar pattern
Linear Frequency Response
The Kit Includes 2x Matched Microphones, 2x Shock-Mount Mic Holders, 2 Pop-Filters, and 1 Adjustable Stereo Bar
Element: Pressure Gradient Transducer
Polar Pattern: Uni-directional (Cardioid)
Frequency Response: 30Hz-20kHz
Match Tolerance: Within 1dB (from 100Hz to 10kHz – excluding 1kHz)
Sensitivity: -38dB+/-2dB (0dB=1V/Pa @ 1kHz)
Output impedance: 100ohm +/- 30% @ 1kHz
Self-Noise: 16dB (A-weighted)
Max. input SPL: 130dB (@ 1 kHz = 1% T.H.D)
S/N Ratio: 78dB
Input Attenuation: 0dB/-10dB Selector
Low frequency attenuation: 100Hz 12dB/Octave
Power Requirement: +48V Phantom Power
http://images.myfrenex.com/dataweb/J023J/Allegati/MANUALI/[ENG-ITA]_PCM-8000_MATCH_User_Manual_v1.0.pdf
